Current location：
Links：
Bird cage to keep clean, bird cage is the birds often live and activity place, so the bird cage should not only have a place to put water and food, but also need to be cleaned regularly to the bird cage, so as to reduce the parasite.
The formation process of hot dip galvanized layer is the process of forming iron-zinc alloy between the iron matrix and the outside pure zinc layer. The surface of the workpiece forms the iron-zinc alloy layer during the hot dip plating, so that the iron and pure zinc layer is well combined. The process of large roll galvanized wire can be simply described as: when the iron workpiece is immersed in the molten zinc solution, the first zinc and α-iron (body-centered) solid melt is formed on the interface. This is a crystal formed by the matrix metal iron dissolved with zinc atoms in the solid state. The two metal atoms are fused with each other, and the gravitational attraction between the atoms is relatively small.
The galvanized layer forms a particular metallurgical structure that is capable of accepting mechanical damage during transport and use. Every part of the plating can be zinc plated, even in dents, sharp corners and hidden places can be fully maintained. The galvanizing process is more convenient than other coating construction methods, and can avoid the required time after the installation on the site.
Fence use: The use of the fence is generally one meter two to two meters a height of the impregnated welding mesh, mesh mostly 6cm, wire diameter from 2mm to 3mm.
3, look at the packaging, the normal packaging appearance is to use a layer of kraft paper paper with film to package our welded welding net, so that it will not be oxidized and rusted in transit. Hot wire coating is thick, generally 30-60 microns, coating corrosion resistance is high. Suitable for outdoor work of steel parts, such as highway fence, power tower, large size fasteners and other relatively “rough” workpiece long-term rust prevention. The hot dip galvanized wire is made of high quality carbon structural steel by drawing and hot dip galvanizing. Widely used in the manufacture of wire mesh, highway protection and construction engineering. It has the characteristics of thick coating, strong corrosion resistance and firm coating. And according to the special needs of users, according to industry standards to provide various specifications of galvanized wire.Post time: 11-01-23 The most obvious gap in a short time is the cross section of this piece, hot dip galvanized barbed wire because it is the surface anti-corrosion treatment, so in the cross section of this piece will appear rust, and stainless steel barbed wire because the internal raw materials and surface raw materials are consistent, so there is no such situation. In the selection of birdcage, the characteristics of the birds, the way of daily management, the impact of the surrounding environment and so on should be considered. Therefore, it is necessary to have requirements on the shape, structure and technology of the cage, so that the cage can not only be suitable for the birds’ activities, but also delicate and beautiful.
Now it is more used in the binding of the construction industry. Compared with ordinary wire, it is also softer and has better luster. Use in daily life does not need to carry out maintenance and maintenance, saving a lot of time, but also save the cost of maintenance and maintenance. Annealed wire has good stability, good corrosion resistance, greatly prolonging the service life. There are many kinds, which can be selected according to different uses. The device for making annealed wire is simple, and the utilization rate of the device is improved. The material properties of annealed wire can meet different processing needs.
Post time: 25-08-22
In order to make the zinc content of steel wire stable in the future, and maintain its uniformity, as far as possible to reduce the zinc content, and effectively reduce zinc consumption to the actual work, the following measures are proposed by the wire factory:
Post time: 26-09-22
Post time: 28-02-23 Hexagonal net weaving methods: positive twist, reverse twist, two-way twisting, first editing after plating, first plating after editing, and then divided into hot dip galvanized hexagonal net, electric galvanized hexagonal net, PVC plastic coated hexagonal net, stainless steel hexagonal net, etc.
Some customers may not use the blade barbed rope immediately when they buy it, some are retail, and some are temporarily unavailable for the construction site. At this time, customers need to follow up the characteristics of the blade barbed rope for storage.
Coping methods we also have: 1, gouging, the straight wire rolled into a wavy shape, but still not enough to raise chickens with mesh can only be large enough to extend the beak can not feed! 2, is the electric welding net, with the current to wire spot welding together, mesh is not limited.
Post time: 09-03-23 In current market is a lot of manufacturers, that is to say, when consumer is choosing the blade thorn rope can see more manufacturers, after the contrast is that you can know what is good, can from the strength of the manufacturer, the type of product, the quality of the product and the price of the maternity leave and so on comprehensive comparison, so when the actual choice will be more easy and convenient, And the high-value blade barbed rope in the use process can also play better, so that we really know what is a good product.
The last is the size of the barbed rope or blade barbed rope. The commonly used size is good, especially for some special-shaped products, which need to be mentioned repeatedly in the production process of the barbed rope factory to avoid unnecessary losses.
Post time: 05-07-22